ZINC PLATED - Helps prevent rust in dry environments
WIDE RANGE OF SIZES - Insures proper fastener for best results
PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation
HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation
Installing wedge anchors can be completed in three easy steps. Wedge anchors can be used in solid concrete applications, are best suited for light to heavy duty fastening purposes, are available in diameters from 1/4" up to 1-1/4", and are available in standard zinc plated, hot dipped galvanized and stainless steel. To determine the minimum anchor length for your application, simply add the material thickness to the minimum embedment and add the thickness of the nut & washer.
Drill and clean
Drill a hole in the concrete at least 1/2" deeper than the wedge anchor embedment using a hammer drill and a correctly sized carbide tipped bit. (Hole size is wedge anchor size).
Clean out the hole of all debris.
Insert wedge anchor
Place the nut on the end of the wedge anchor (to protect the threads of the wedge anchor during installation).
Hammer the wedge anchor into the hole deep enough so that the threads are below the surface of the base material.
Tighten the nut
Tighten the nut - torque to the appropriate foot pounds
){kind=link}